Skip to main content
Call Now: (720) 436-5746
Baseboard · Wall Heaters · Thermostats

Electric Baseboard & Wall Heater Repair in Bailey, CO

A cold bedroom in January at nearly 8,000 feet isn't a someday problem. We fix electric baseboard heaters, fan-forced wall heaters, and the 240V thermostats that run them in Bailey, Conifer, Evergreen, and along the 285 Corridor.

Need Baseboard Heater Repair Near You in Bailey?

Tri Peaks Electric Service does baseboard heater repair and electric wall heater repair in Bailey, CO and across Park and Jefferson County. The usual causes are a worn thermostat, a tripped limit switch, or a burned connection, and those parts can usually be replaced in one visit.

Before you call, check the breaker. Most 240V baseboard heaters use a double-pole breaker, and if it's tripped, reset it once. If it trips again, leave it off and call (720) 436-5746. We answer 7 days a week, 7AM–8PM.

Last updated November 2026.

Common Problems

Why Is My Baseboard Heater Not Working?

Heater is cold, breaker is on

Usually a failed thermostat, a tripped high-limit, or a burned connection in the heater's junction box.

Heater won't shut off

Thermostat contacts welded closed. Turn the breaker off; this one wastes power and can overheat nearby furniture or drapes.

Breaker trips when it heats

A shorted element, damaged wiring, or a circuit carrying more heaters than it should.

Burning smell or scorched cover

Dust burning off on the first cold day is normal. A smell that lingers, or discoloration at the end cap, isn't.

Wall heater fan is noisy or dead

Fan-forced bathroom and entry heaters collect dust and lose motors. Often a replace-the-insert job.

Room never gets warm enough

The heater may be undersized for the room, or blocked by furniture or drapes. We'll tell you which.

How It Works

How We Track Down a Heater Problem

  1. 1

    Check the breaker and the thermostat

    We confirm the heater is getting 240 volts at the breaker and the thermostat, which rules out half the problems in a few minutes.

  2. 2

    Test the heater itself

    We meter the element and the high-limit switch and inspect the junction box for burned or loose connections.

  3. 3

    Quote the fix

    You get a plain-English answer about what failed and a firm price before we replace anything.

  4. 4

    Repair and verify

    We replace the failed thermostat, limit, connection, or heater and confirm it cycles on and off correctly.

Electric Heat in Mountain Homes

Some mountain homes and cabins rely on electric baseboard heat, either as the main heat or as backup in bedrooms, basements, and additions. It's simple and quiet, but it's a heavy load. Each heater pulls real current on a 240V circuit, all winter long.

That's why we look past the single heater. In older homes the real problem can be too many heaters on one circuit, aluminum branch wiring, or a 100-amp panel that's maxed out. If that's the real issue, we'll say so and point you to a panel upgrade or an electrical inspection instead of replacing parts that will fail again.

Electric heat also stops when the power does. If outages are leaving you cold, a generator inlet and transfer switch can keep a few key circuits running.

Before the First Cold Snap

  • Breaker off, then vacuum the fins and clear dust from the end caps
  • Keep furniture and drapes a few inches clear of every heater
  • Turn each thermostat up and confirm the heater clicks on, then back off
  • Note any heater that smells, buzzes, or stays cold, and have it checked
Call (720) 436-5746
FAQ

Baseboard Heater Repair Questions

When one heater is dead and the rest of the house is fine, the cause is usually that room's double-pole breaker, its thermostat, or a burned wire connection at the heater. A tripped high-limit switch can also shut it off if furniture or drapes are blocking airflow. Check the breaker first. If it's on and the heater is still cold, call us.

Get Started Today

Ready to Get Started?

Call or book online today. We serve Bailey, Conifer, Evergreen, and the entire 285 Corridor. Fast response — licensed & insured.

Free Estimates Licensed & Insured Same-Day Available No Surprise Pricing